Company profile
HomeCompany profileSafety programDonationsContact

© 2010 Bartek Wireline Services
250-785-1997
        Home
      Company profile
       Safety program
       Donations 
       Contact

Bartek Wireline Services Ltd.
RR1, Site 1, Comp 40, Fort St. John, B.C., V1J-4M6
Telephone : (250)785-1997 Fax : (250)785-8697

SERVICES OFFERED:
Setting Tubing Plugs, Shifting Sleeves, BHP’s Surveys, Fishing, Dewaxing, Drifting, Tagging Bottom, Bailing, and Swabbing with .125 or .140 line.

EXPERIENCED PERSONNEL:
Bartek Wireline boasts a nine man team of fully trained and certified professionals. They are proficient with Otis, Baker, Calscan and Panther down-hole equipment, and take pride in a job well done.

AREA OF OPERATION:
'A' Northern Region – North from Prophet River.
'B' Southern Region – South from Prophet River.

INSURANCE:
Bartek Wireline Ltd. carries $5,000,000.00 Liability Insurance.
Insurance certificate available upon request.

WORKSAFE COVERAGE:
Bartek Wireline has Worksafe coverage in British Columbia and Alberta.
WCB #: 569014.

POLICIES AND PROCEDURES:
Bartek Wireline has in place a comprehensive Health, Safety & Environmental Manual that details our company’s strict safety policies. Copies are available upon request.

TAXES:
Bartek’s price quotes do not include applicable taxes. Applicable taxes will be itemized on job invoice.

BARTEK WIRELINE SERVICES LTD.’S CHARGING POLICIES:
EQUIPMENT CHARGES - All charges begin when equipment or tools are run in the hole and continue until they are pulled out of the hole. When necessary, additional charges will be applied in order to restore tools or equipment to their original condition prior to use.

TRANSPORTATION – Additional charges will be made per kilometer (with no daily minimum) when transporting N2 and for equipment hot shots. The Wireline truck will be charged at an hourly rate only. Equipment damage due to towing or abnormal road conditions will be applied to the customer.

REMOTE TRANSPORTATION - Bartek’s equipment and personnel may be transported by alternate means beyond the company’s scope when it is necessary due to weather, road conditions, or location of work. On these occasions, an hourly rate will be charged to the customer and will commence upon leaving the company’s shop. Both the transportation and equipment used for transportation will remain the customer’s responsibility.

STAINLESS STEEL LINE – Should Bartek’s stainless steel line become damaged or broken due to circumstances beyond Bartek Wireline personnel’s control, a charge for line replacement will be applied to the customer.
EQUIPMENT:
SOUTHERN REGION
RATES
NORTHERN REGION
RATES
WIRELINE UNIT
Capable of operating to the depth of 6,000 meters. Equipped to perform all types of heavy Slickline service, 35Mpa BOP’s, Packoff & Lubricator.
$210.00 per hr (2 hour minimum per day) Includes operator and assistant
$220.00 per hr (2 hour minimum per day)
Includes operator and assistant
PICKER TRUCK 15-20 Ton
PICKER TRUCK 20-25 Ton
Includes operator
$210.00 per hour (2 hr min per day)
$230.00 per hour (2 hr min per day)
$220.00 per hour (2 hr min per day)
$240.00 per hour (2 hr min per day)
PICK UP 
DRIVER and CREW travelling in pickup
$1.10 per km
$50.00 per hr, per man
$1.10 per km
$50.00 per hr, per man
SKID MOUNTED WIRELINE UNIT and SKID BOX (includes operator and assistant)

JIN POLE HOISTING EQUIP
$280.00 per hr (4 hour min per day)


$400.00 per day
$280.00 per hr (4 hour min per day)


$400.00 per day
SKID UNIT on location unmanned

70Mpa HIGH PRESSURE EQUIPMENT
$1000.00 per day

$4800.00 per day
$1000.00 per day

$4800.00 per day
Manned Standby Rates as above, unless other arrangements are agreed upon.
PERSONNEL:
REGULAR RATES
STATUTORY HOLIDAYS
WIRELINE SPECIALIST
$800.00 per 12hr day
Additional $40.00 per hr/max 8 hrs
WIRELINE ASSISTANT or EXTRA MAN
$500.00 per 12hr day
Additional $30.00 per hr/max 8 hrs
PICKER OPERATOR
Included in Picker Truck cost
Additional $40.00 per hr/max 8 hrs
SUBSISTENCE - $250.00 per day, per man

EQUIPMENT
AIR PACK
$50.00
Per day
BLIND BOX
$60.00
Per day
BOPs 2nd Set
$200.00
Per day
BOMB WELL
$40.00
Per day
BROACHING TOOL
$400.00
Per day
C-1 RUNNING TOOL
$100.00
Per day
CENTRALIZER
$200.00
Per day
CHECK SET TOOL
$120.00
Per day
CHISELS & SPEARS
$120.00
Per day
COLLAR STOPS
2 ½” or smaller
$50.00
Per day
3”
$70.00
Per day
4 ½”
$100.00
Per day
5”
$120.00
Per day
7 ½”
$150.00
Per day
COLLAR STOP RUNNING TOOL
$60.00
Per day
COMPOUNDER
$400.00
Per day
CUTTER BAR
$150.00
DART or BULLNOSE NO-GO
$40.00
Per day
EQUALIZING HOSE
$50.00
Per day
FLARE STACK AND FLARE HOSE
$200.00
Per day
FLOW - T
$100.00
Per day
GAUGE RING
Up to 2 ½ “
$100.00
Per day
Over 2 ½ “
$200.00
Per day
WIRE GRABS & SPEARS
1 ¼” up to 3 ”
$150.00
Per day
4 finger
$200.00
Per day
H2S MONITOR
$35.00
Per day
HOLD DOWN
$40.00
Per day
4 ½” HOLD DOWN
$100.00
Per day
5 ½” HOLD DOWN
$120.00
Per day
HYDRAULIC JARS
1 ¼”, 1 ½”
$300.00
Per day
1 ¾”, 1”
$350.00
Per day
1½” extra long stroke bowen jars
$400.00
Per day
IMPRESSION BLOCK
Up to 2 ½ “
$150.00
Per day
Over 2 ½ “
$250.00
Per day
Over 4"
$400.00
Per day
J – UNLATCH TOOL
$100.00
Per day
KICKOVER TOOL
$400.00
Per day
KNUCKLE JOINTS
1 ¼”, 1 ½”, 1 ¾”
$60.00
Per day
MAGNETS
1” to 2 ½”
$200.00
Per day
Over 2 ½“
$300.00
Per day
OIL INJECTION SUB & PUMP
$200.00
Per day
POSITIVE GRABS
$400.00
Per day
PULLING TOOLS
Up to 2 ½ “
$160.00
Per day
Over 2 ½ “
$225.00
Per day
GS up to 2 ½ “
$250.00
Per day
GS Over 2 ½ “
$300.00
Per day
PROBES
'N'
$80.00
Per day
BAKER
$50.00
Per day
SAMPLE BAILER
Short 18"
$100.00
Per day
Long 60"
$150.00
Per day
SAMPLE SCRAPER/CATCHER
$150.00
Per day
SHIFTING TOOLS THRU’ 3”
$325.00
Per day
SLIP-TYPE STOPS
2 ½” or smaller
$100.00
Per day
$50.00
Each additional day
Over 2 ½ “
$150.00
Per day
$75.00
Each additional day
STAINLESS STEEL LINE
.108
$400.00
Per day
.125
$800.00
Per day
.140
$1200.00
Per day
SINKER BAR
1 ¼”, 1 ½”, 5 ft sections
$25.00
Per day
1 ¾” 5 ft sections
$30.00
Per day
SWAB MANDREL
$90.00
Per day
SWEDGING TOOLS
$100.00
Per day
SWIVEL
$80.00
Per day
TOOLS STRING (ROPE SOCKET, STEM & SPANG JARS)
¾”, 1”, 1 ¼” 1 ¾”
$250.00
Per day
1 ½”
$200.00
Per day
TUBING END LOCATOR
$150.00
Per day
TUBING PERFORATOR (mechanical)
2 ½” or smaller
$550.00
1st Perforation
$250.00
Each additional Perf
3”
$700.00
1st Perforation
$300.00
Each additional Perf
TYPE “A” FISHING TOOLS
$300.00
Per day
X-LINE RUNNING TOOLS
up to 2 ½ “
$300.00
Per day
Over 2 ½ “
$450.00
Per day
WAX KNIFE / TUBING BRUSH
$90.00
Per day
R-46 x 7" HYDROLUX 35Mpa
$400.00
Per day
FLANGES
7" x 5½” HYDRO,  5½” LUB 35Mpa
$100.00
Per day
5½” HYDRO x 3½" BOWEN 35Mpa
$100.00
Per day
R-45 x 5½" EUE 21Mpa
$250.00
Per day
5½” Flow - T 21Mpa
$200.00
Per day
R-24,27,& 35 x 3½" BOWEN 35Mpa
BX152, BX153, BX154 X 3"Type 'B'
$250.00
$350.00
Per day
Per day
28 MPA PRESSURE PUMP
$400.00
Per day
METHONOL PUMP and N2
DIESEL
MARKET
Per litre – Sale item
METHONOL
MARKET
Per litre – Sale item
N2 PURGE SYSTEM up to 28mpa
$250.00
Per day
N2 BOTTLE 28mpa
$200.00
Each
N2 BOTTLE Lubricator Purge
$50.00
Per well
N2 PICK-UP CHARGES
$1.10
Per kilometre
DUMP BAILER
$600.00
Per day
TUBING BAILERS
HYDROSTATIC BAILER
$400.00
Per day
2nd HYDROSTATIC BAILER
$400.00
Per day
STROKE BAILER
$400.00
Per day
2ND STROKE BAILER
$400.00
Per day
SAMPLER BAILER 18"
$100.00
Per day
SAMPLER BAILER 60"
$150.00
Per day
1.50 – 1.62 BAKER or OTIS
$450.00
Per Well – 1st day
TUBING PLUGGING EQUIPMENT & NIPPLE LOCKING MANDRELS
$200.00
Each additional day
Over 2 ½” BAKER or OTIS
1.78-2 ½” GENUINE OTIS
$500.00
Per Well – 1st day
$225.00
Each additional day
CIRCULATING PLUG
$500.00
Per day
1.78” – 2 ½” BAKER or OTIS
$400.00
Per Well – 1st day
$150.00
Each additional day
“G” PACKOFF
SIZES THRU’ 3” TUBING
$500.00
1st Day
$200.00
Each additional day
“G” PACKOFF ELEMENT
$180.00
Sale Item
KOBES KNOCKOUTS
$45.00
Sale Item
LOCK MANDREL
2 ½ “ or SMALLER
$100.00
Per day
Over 2 ½ “
$120.00
Per day
"N" TEST PLUG
$250.00
Per day
XO TEST TOOL
$500.00
Per day
SSJ
$200.00
Per day
TUBING BRIDGE PLUGS
OWEN SHORTY SETTING TOOL
$1200.00
Per day
EXPLOSIVES
$200.00
Sale item
1.71" BRIDGE PLUGS
$680.00
Sale item
2.16"
$860.00
Sale item
GAUGE TYPE
DAILY RENT TANDEM
EXT. CHARTS TANDEM
BOTTOM HOLE PRESSURE GAUGE SERVICE
GRAD. CHARTS TANDEM
BATTERIES TANDEM
DEAD WEIGHT GAUGE
$60.00
N/A
N/A
N/A
PANTHERS
$250.00
$300.00
$0 for tests over 15 days
$200.00
Included
FIELD COMPUTER
$100.00
N/A
N/A
N/A
CALSCAN BADGER & MOLE
$250.00
$300.00
$0 for tests over 15 days
$200.00
Included
REMOTE DEAD WEIGHT GAUGE
$150.00
N/A
N/A
N/A
SURFACE RECORDERS
Install or Removal
$125.00 per
Channel
$250.00 per day plus pickup
$200.00 per channel

Included
***Additional types of electronic and mechanical gauges may be arranged, prices upon request.

Tool rental discounts also apply to BHP Gauge rentals and if Gauges are in well more than 30 days an additional discount of 10% will be applied to Gauges and all other extended downhole tools.
LOST EQUIPMENT - If Bartek’s personnel are unable to recover Bartek’s equipment used while servicing a customer’s well, a charge shall be applied for said lost equipment. Upon recovery of said equipment and its return, a full credit will be issued less any reconditioning costs.

EXCESSIVE PRESSURE WELLS – When wells exceed 35000 kpa (5000 psi), hourly charges will be applied at Northern rates in addition to the rental of 70Mpa high pressure Surface Equipment.

SPECIAL REQUESTS - Transportation costs due to customer’s special requests will be charged back to the customer. If special equipment must be acquired from sources beyond Bartek Wireline Services Ltd., the usage charges will be applied as third party charges.

*All charges are subject to change without notice.

WIRELINE SERVICES
Travel & Operating Costs of One Wireline Specialist and One Assistant